SECTION 1112A [FOR
HCD 1/AC & DSA/AC] - KITCHENS
1112A.1 [For HCD 1/AC & DSA/AC] Kitchen Sink Faucet Controls. Kitchen sink faucet controls shall comply with the provisions of Section 1508, California Plumbing Code, Title 24, Part 5, California Code of Regulations. 1112A.2 [For
HCD 1/AC & DSA/AC] Countertops. A
minimum linear length of 30 inches (762 mm) of countertop shall be provided
for the kitchen sink, and a minimum linear length of 30 inches (762
mm) of countertop shall be
provided for a work surface, both of which shall be designed to enable repositioning
to a minimum height of 28 inches (711 mm). The sink and work surface
may be a single integral
unit, or be separate components. The base cabinets directly under sink and
work surface counter areas which are designed for repositioning shall
be removable to provide clearance
for a wheelchair.
The sides and back of adjacent cabinets, which may become exposed to moisture or food handling when a countertop is lowered, shall be constructed of durable, nonabsorbent materials appropriate for such uses. Finished flooring shall be installed on the floor beneath such countertop. 1112A.3 [For HCD 1/AC & DSA/AC] Lower shelving. Lower shelving and/or drawer space shall be provided in the kitchen at a height of no more than 48 inches (1219 mm). 1112A.4 [For
HCD 1/AC & DSA/AC] Base cabinets. In
dwelling units required to be accessible, base cabinets directly under kitchen
sink counter area, including toeboard and shelving, shall be removable
without the use of
specialized tools or specialized knowledge to provide clearance for a wheelchair.
Finished flooring shall be provided on the floor beneath the countertop.
|